Terms and Conditions
GENERAL TERMS AND CONDITIONS MakeOn and/or Mission Control Lab
Definitions
1. MakeOn and/or Mission Control Lab : Mission Control Lab B.V., Mission Control Lab Inc., Mission Control Lab Z.Z.P. , established in USA and NL , Chamber of Commerce no. 80821820.
2. Customer: the person with whom MakeOn and/or Mission Control Lab has entered into an agreement.
3. Parties: MakeOn and/or Mission Control Lab and customer together.
4. Consumer: a customer who is an individual acting for private purposes.
Applicability
1. These terms and conditions will apply to all quotations, offers, activities, orders, agreements and deliveries of services or products by or on behalf of MakeOn and/or Mission Control Lab .
2. Parties can only deviate from these conditions if they have explicitly agreed upon in writing.
3. The parties expressly exclude the applicability of supplementary and/or deviating general terms and conditions of the customer or of third parties.
Prices
1. All prices used by MakeOn and/or Mission Control Lab are in euros, are exclusive of VAT and exclusive of any other costs such as administration costs, levies and travel-, shipping- or transport expenses, unless expressly stated otherwise or agreed otherwise.
2. MakeOn and/or Mission Control Lab is entitled to adjust all prices for its products or services, shown in its shop, on its website or otherwise, at any time.
3. Increases in the cost prices of products or parts thereof, which MakeOn and/or Mission Control Lab could not foresee at the time of making an offer or the conclusion of the agreement, may give rise to price increases.
4. The consumer has the right to terminate an agreement as a result of a price increase as referred to in paragraph 3, unless the increase is the result of statutory regulation.
5. The price with regard to services is determined by MakeOn and/or Mission Control Lab on the basis of the actual working hours.
6. The price is calculated according to the usual hourly rates of MakeOn and/or Mission Control Lab , valid for the period in which he carries out the work, unless a different hourly rate has been agreed.
7. If the parties have agreed on a total amount for a service provided by MakeOn and/or Mission Control Lab , this is always a target price, unless the parties have explicitly agreed upon in writing on a fixed price, which cannot be deviated from.
8. MakeOn and/or Mission Control Lab is entitled to deviate up to 10% of the target price.
9. If the target price exceeds 10%, MakeOn and/or Mission Control Lab must let the customer know in due time why a higher price is justified.
10. If the target price exceeds 10%, the customer has the right to cancel the part of the order that exceeds the target price by 10%.
11. MakeOn and/or Mission Control Lab has the right to adjust prices annually.
12. MakeOn and/or Mission Control Lab will communicate price adjustments to the customer prior to the moment the price increase becomes effective.
13. The consumer has the right to terminate the contract with MakeOn and/or Mission Control Lab if he does not agree with the price increase.
Payments and payment term
1. MakeOn and/or Mission Control Lab may, at the conclusion of the agreement, require a down payment of up to 50% of the agreed amount.
2. The customer must have paid the full amount within 7 days after delivery of the product.
3. Payment terms are considered as fatal payment terms. This means that if the customer has not paid the agreed amount at the latest on the last day of the payment term, he is legally in default, without MakeOn and/or Mission Control Lab having to send the customer a reminder or to put him in default.
4. MakeOn and/or Mission Control Lab reserves the right to make a delivery conditional upon immediate payment or to require adequate security for the total amount of the services or products.
Payments and payment term - Store
Products are immediately paid for in the store.
Consequences of late payment
1. If the customer does not pay within the agreed term, MakeOn and/or Mission Control Lab is entitled to charge an interest of 1% per month from the day the customer is in default, whereby a part of a month is counted for a whole month.
2. When the customer is in default, he is also due to extrajudicial collection costs and may be obliged to pay any compensation to MakeOn and/or Mission Control Lab .
3. The collection costs are calculated on the basis of the Reimbursement for extrajudicial collection costs.
4. If the customer does not pay on time, MakeOn and/or Mission Control Lab may suspend its obligations until the customer has met his payment obligation.
5. In the event of liquidation, bankruptcy, attachment or suspension of payment on behalf of the customer, the claims of MakeOn and/or Mission Control Lab on the customer are immediately due and payable.
6. If the customer refuses to cooperate with the performance of the agreement by MakeOn and/or Mission Control Lab , he is still obliged to pay the agreed price to MakeOn and/or Mission Control Lab .
Right of recovery of goods
1. As soon as the customer is in default, MakeOn and/or Mission Control Lab is entitled to invoke the right of recovery with regard to the unpaid products delivered to the customer.
2. MakeOn and/or Mission Control Lab invokes the right of recovery by means of a written or electronic announcement.
3. As soon as the customer has been informed of the claimed right of recovery, the customer must immediately return the products concerned to MakeOn and/or Mission Control Lab , unless the parties agree to make other arrangements about this.
4. The costs for the collection or return of the products are at the expense of the customer.
Right of cancellation
1. A consumer may cancel an online purchase during a cooling-off period of 14 days without giving any reason, provided that
· the product has not been used
· it is not a product that can spoil quickly, like food or flowers
· the product is not specially tailored for the consumer or adapted to its special needs
· it is not a product that may not be returned for hygienic reasons (underwear, swimwear, etc.)
· the seal is still intact, when the product is a data carrier with digital content (DVDs, CDs, etc.)
· the product is not a (holiday)trip, a transportation ticket, a catering order or a form of leisure activity,
· the product is not a separate magazine or a loose newspaper
· the purchase does not concern an (assignment to) urgent repair
· the consumer has not renounced his right of cancellation
2. The reflection period of 14 days as referred to in paragraph 1 commences:
o on the day after the consumer has received the last product or part of 1 order
o as soon as the consumer has received the first the product of a subscription
o as soon as the consumer has purchased a service for the first time
o as soon as the consumer has confirmed the purchase of digital content via the internet
3. The consumer can notify his right of cancellation via info@missioncontrollab.com, if desired by using the withdrawal form that can be downloaded via the website of MakeOn and/or Mission Control Lab , Missioncontrollab.com, Makeon.xzy, makeon.learnworlds.com.
4. The consumer is obliged to return the product to MakeOn and/or Mission Control Lab within 14 days after the notification of his right of cancellation, after which period his right of cancellation will lapse.
5. The costs for return are due MakeOn and/or Mission Control Lab if the complete order is returned.
6. If the purchase costs and any other costs (such as shipping and return costs) are eligible for reimbursement according to the law, MakeOn and/or Mission Control Lab will refund these costs to the consumer within 14 days of receipt of the timely appeal to the right of withdrawal, provided that the consumer has returned the product to MakeOn and/or Mission Control Lab in time.
Suspension of obligations by the customer
The customer waives the right to suspend the fulfillment of any obligation arising from this agreement.
Right of retention
1. MakeOn and/or Mission Control Lab can appeal to his right of retention of title and in that case retain the products sold by MakeOn and/or Mission Control Lab to the customer until the customer has paid all outstanding invoices with regard to MakeOn and/or Mission Control Lab , unless the customer has provided sufficient security for these payments.
2. The right of retention of title also applies on the basis of previous agreements from which the customer still owes payments to MakeOn and/or Mission Control Lab .
3. MakeOn and/or Mission Control Lab is never liable for any damage that the customer may suffer as a result of using his right of retention of title.
Settlement
The customer waives his right to settle any debt to MakeOn and/or Mission Control Lab with any claim on MakeOn and/or Mission Control Lab .
Retention of title
1. MakeOn and/or Mission Control Lab remains the owner of all delivered products until the customer has fully complied with all its payment obligations with regard to MakeOn and/or Mission Control Lab under whatever agreement with MakeOn and/or Mission Control Lab including of claims regarding the shortcomings in the performance.
2. Until then, MakeOn and/or Mission Control Lab can invoke its retention of title and take back the goods.
3. Before the property is transferred to the customer, the customer may not pledge, sell, dispose of or otherwise encumber the products.
4. If MakeOn and/or Mission Control Lab invokes its retention of title, the agreement will be dissolved and MakeOn and/or Mission Control Lab has the right to claim compensation, lost profits and interest.
Delivery
1. Delivery takes place while stocks last.
2. Delivery takes place at MakeOn and/or Mission Control Lab unless the parties have agreed upon otherwise.
3. Delivery of products ordered online takes place at the address indicated by the customer.
4. If the agreed price is not paid on time, MakeOn and/or Mission Control Lab has the right to suspend its obligations until the agreed price is fully paid.
5. In the event of late payment, the customer is automatically in default, and hereby he cannot object to late delivery by MakeOn and/or Mission Control Lab .
Delivery period
1. Any delivery period specified by MakeOn and/or Mission Control Lab is indicative and does not give the customer the right to dissolution or compensation if this period is not met with, unless the parties have expressly agreed otherwise in writing.
2. The delivery starts once the customer has fully completed the (electronic) ordering process and received an (electronic) confirmation of his order from MakeOn and/or Mission Control Lab .
3. Exceeding the specified delivery period does not entitle the customer to compensation or the right to terminate the contract, unless MakeOn and/or Mission Control Lab cannot deliver within [number of days late] or if the parties have agreed upon otherwise.
Actual delivery
The customer must ensure that the actual delivery of the products ordered by him can take place in time.
Transport costs
Transport costs are on behalf of the customer, unless the parties have agreed upon otherwise.
Packaging and shipping
1. If the package of a delivered product is opened or damaged, the customer must have a note drawn up by the forwarder or delivery person before receiving the product. In the absence of which MakeOn and/or Mission Control Lab may not be held liable for any damage.
2. If the customer himself takes care of the transport of a product, he must report any visible damage to products or the packaging prior to the transport to MakeOn and/or Mission Control Lab , failing which MakeOn and/or Mission Control Lab cannot be held liable for any damage.
Insurance
1. The customer undertakes to insure and keep insured the following items adequately against fire, explosion and water damage as well as theft:
o goods delivered that are necessary for the execution of the underlying agreement
o goods being property of MakeOn and/or Mission Control Lab that are present at the premises of the customer
o goods that have been delivered under retention of title
2. At the first request of MakeOn and/or Mission Control Lab , the customer provides the policy for these insurances for inspection.
Storage
1. If the customer orders products later than the agreed delivery date, the risk of any quality loss is entirely for the customer.
2. Any extra costs as a result of premature or late purchase of products are entirely at the customer's expense.
Guarantee
1. When parties have entered into an agreement with services included, these services only contain best-effort obligations for MakeOn and/or Mission Control Lab , not obligations of results.
2. The warranty relating to products only applies to defects caused by faulty manufacture, construction or material.
3. The warranty does not apply in the event of normal wear and tear and damage resulting from accidents, changes made to the product, negligence or improper use by the customer, or when the cause of the defect cannot clearly be established.
4. The risk of loss, damage or theft of the products that are the subject of an agreement between the parties, will pass on to the customer when these products are legally and/or factually delivered, at least are in the power of the customer or of a third party who receives the product for the benefit of the customer.
Performance of the agreement
1. MakeOn and/or Mission Control Lab executes the agreement to the best of its knowledge and ability and in accordance with the requirements of good workmanship.
2. MakeOn and/or Mission Control Lab has the right to have the agreed services (partially) performed by third parties.
3. The execution of the agreement takes place in mutual consultation and after written agreement and payment of the possibly agreed advance by the customer.
4. It is the responsibility of the customer that MakeOn and/or Mission Control Lab can start the implementation of the agreement on time.
5. If the customer has not ensured that MakeOn and/or Mission Control Lab can start the implementation of the agreement in time, the resulting additional costs and/or extra hours will be charged to the customer.
Duty to inform by the customer
1. The customer shall make available to MakeOn and/or Mission Control Lab all information, data and documents relevant to the correct execution of the agreement to in time and in the desired format and manner.
2. The customer guarantees the correctness, completeness and reliability of the information, data and documents made available, even if they originate from third parties, unless otherwise ensuing from the nature of the agreement.
3. If and insofar as the customer requests this, MakeOn and/or Mission Control Lab will return the relevant documents.
4. If the customer does not timely and properly provides the information, data or documents reasonably required by MakeOn and/or Mission Control Lab and the execution of the agreement is delayed because of this, the resulting additional costs and extra hours will be charged to the customer.
Duration of the agreement
1.
2. If a fixed-term contract has been entered into, it will be tacitly converted into an open-ended contract at the end of the term, unless 1 of the parties terminates the contract with due observance of a notice period of 2 month(s), or if a consumer terminates the agreement with due observance of a notice period of 1 month / the agreement ends at the end of the fixed term.
3. If the parties have agreed upon a term for the completion of certain activities, this is never a strict deadline, unless specified explicitly otherwise in writing. If this term is exceeded, the customer must give MakeOn and/or Mission Control Lab a written reasonable term to terminate the activities, before it may either terminate the contract or claim damages.
Intellectual property
1. MakeOn and/or Mission Control Lab retains all intellectual property rights (including copyright, patent rights, trademark rights, design and design rights, etc.) on all designs, drawings, writings, data carriers or other information, quotations, images, sketches, models, scale models, etc., unless parties have agreed otherwise in writing.
2. The customer may not copy or have copied the intellectual property rights without prior written permission from MakeOn and/or Mission Control Lab , nor show them to third parties and / or make them available or use them in any other way.
Penalties
1. If the customer violates the articles of these general terms and conditions about secrecy or intellectual property, then he forfeits on behalf of MakeOn and/or Mission Control Lab an immediately due and payable fine of € 1000 if the customer is a consumer and € 5000 if the customer is a company, for each violation and in addition an amount of 5% of the aforementioned amount for each day that this violation continues.
2. No actual damage, prior notice of default or legal proceedings are required in forfeiting the fine referred to in the first paragraph of this article.
3. The forfeiture of the fine referred to in the first paragraph of this article shall not affect the other rights of MakeOn and/or Mission Control Lab including its right to claim compensation in addition to the fine.
Indemnity
The customer indemnifies MakeOn and/or Mission Control Lab against all third-party claims that are related to the products and/or services supplied by MakeOn and/or Mission Control Lab .
Complaints
1. The customer must examine a product or service provided by MakeOn and/or Mission Control Lab as soon as possible for possible shortcomings.
2. If a delivered product or service does not comply with what the customer could reasonably expect from the agreement, the customer must inform MakeOn and/or Mission Control Lab of this as soon as possible, but in any case within 1 month after the discovery of the shortcomings.
3. Consumers must inform MakeOn and/or Mission Control Lab of this within two months after detection of the shortcomings.
4. The customer gives a detailed description as possible of the shortcomings, so that MakeOn and/or Mission Control Lab is able to respond adequately.
5. The customer must demonstrate that the complaint relates to an agreement between the parties.
6. If a complaint relates to ongoing work, this can in any case not lead to MakeOn and/or Mission Control Lab being forced to perform other work than has been agreed.
Giving notice
1. The customer must provide any notice of default to MakeOn and/or Mission Control Lab in writing.
2. It is the responsibility of the customer that a notice of default actually reaches MakeOn and/or Mission Control Lab (in time).
Joint and several Client liabilities
If MakeOn and/or Mission Control Lab enters into an agreement with several customers, each of them shall be jointly and severally liable for the full amounts due to MakeOn and/or Mission Control Lab under that agreement.
Liability of MakeOn and/or Mission Control Lab
1. MakeOn and/or Mission Control Lab is only liable for any damage the customer suffers if and insofar as this damage is caused by intent or gross negligence.
2. If MakeOn and/or Mission Control Lab is liable for any damage, it is only liable for direct damages that results from or is related to the execution of an agreement.
3. MakeOn and/or Mission Control Lab is never liable for indirect damages, such as consequential loss, lost profit, lost savings or damage to third parties.
4. If MakeOn and/or Mission Control Lab is liable, its liability is limited to the amount paid by a closed (professional) liability insurance and in the absence of (full) payment by an insurance company of the damages the amount of the liability is limited to the (part of the) invoice to which the liability relates.
5. All images, photos, colors, drawings, descriptions on the website or in a catalog are only indicative and are only approximate and cannot lead to any compensation and/or (partial) dissolution of the agreement and/or suspension of any obligation.
Expiry period
Every right of the customer to compensation from MakeOn and/or Mission Control Lab shall, in any case, expire within 12 months after the event from which the liability arises directly or indirectly. This does not exclude the provisions in article 6:89 of the Dutch Civil Code.
Dissolution
1. The customer has the right to dissolve the agreement if MakeOn and/or Mission Control Lab imputably fails in the fulfillment of his obligations, unless this shortcoming does not justify termination due to its special nature or because it is of minor significance.
2. If the fulfillment of the obligations by MakeOn and/or Mission Control Lab is not permanent or temporarily impossible, dissolution can only take place after MakeOn and/or Mission Control Lab is in default.
3. MakeOn and/or Mission Control Lab has the right to dissolve the agreement with the customer, if the customer does not fully or timely fulfill his obligations under the agreement, or if circumstances give MakeOn and/or Mission Control Lab good grounds to fear that the customer will not be able to fulfill his obligations properly.
Force majeure
1. In addition to the provisions of article 6:75 Dutch Civil Code, a shortcoming of MakeOn and/or Mission Control Lab in the fulfillment of any obligation to the customer cannot be attributed to MakeOn and/or Mission Control Lab in any situation independent of the will of MakeOn and/or Mission Control Lab , when the fulfillment of its obligations towards the customer is prevented in whole or in part or when the fulfillment of its obligations cannot reasonably be required from MakeOn and/or Mission Control Lab .
2. The force majeure situation referred to in paragraph 1 is also applicable - but not limited to: state of emergency (such as civil war, insurrection, riots, natural disasters, etc.); defaults and force majeure of suppliers, deliverymen or other third parties; unexpected disturbances of power, electricity, internet, computer or telecoms; computer viruses, strikes, government measures, unforeseen transport problems, bad weather conditions and work stoppages.
3. If a situation of force majeure arises as a result of which MakeOn and/or Mission Control Lab cannot fulfill one or more obligations towards the customer, these obligations will be suspended until MakeOn and/or Mission Control Lab can comply with it.
4. From the moment that a force majeure situation has lasted at least 30 calendar days, both parties may dissolve the agreement in writing in whole or in part.
5. MakeOn and/or Mission Control Lab does not owe any (damage) compensation in a situation of force majeure, even if it has obtained any advantages as a result of the force majeure situation.
Changes in the general terms and conditions
1. MakeOn and/or Mission Control Lab is entitled to amend or supplement these general terms and conditions.
2. Changes of minor importance can be made at any time.
3. Major changes in content will be discussed by MakeOn and/or Mission Control Lab with the customer in advance as much as possible.
4. Consumers are entitled to cancel the agreement in the event of a substantial change to the general terms and conditions.
Transfer of rights
1. The customer cannot transfer its rights deferring from an agreement with MakeOn and/or Mission Control Lab to third parties without the prior written consent of MakeOn and/or Mission Control Lab .
2. This provision applies as a clause with a property law effect as referred to in Section 3:83 (2) Dutch Civil Code.
Consequences of nullity or annullability
1. If one or more provisions of these general terms and conditions prove null or annullable, this will not affect the other provisions of these terms and conditions.
2. A provision that is null or annullable shall, in that case, be replaced by a provision that comes closest to what MakeOn and/or Mission Control Lab had in mind when drafting the conditions on that issue.
Applicable law and competent court
1. Dutch law is exclusively applicable to all agreements between the parties.
2. The Dutch court in the district where MakeOn and/or Mission Control Lab is established is exclusively competent in case of any disputes between parties, unless the law prescribes otherwise.
Drawn up on 25 november 2020.
Definitions
1. MakeOn and/or Mission Control Lab : Mission Control Lab B.V., Mission Control Lab Inc., Mission Control Lab Z.Z.P. , established in USA and NL , Chamber of Commerce no. 80821820.
2. Customer: the person with whom MakeOn and/or Mission Control Lab has entered into an agreement.
3. Parties: MakeOn and/or Mission Control Lab and customer together.
4. Consumer: a customer who is an individual acting for private purposes.
Applicability
1. These terms and conditions will apply to all quotations, offers, activities, orders, agreements and deliveries of services or products by or on behalf of MakeOn and/or Mission Control Lab .
2. Parties can only deviate from these conditions if they have explicitly agreed upon in writing.
3. The parties expressly exclude the applicability of supplementary and/or deviating general terms and conditions of the customer or of third parties.
Prices
1. All prices used by MakeOn and/or Mission Control Lab are in euros, are exclusive of VAT and exclusive of any other costs such as administration costs, levies and travel-, shipping- or transport expenses, unless expressly stated otherwise or agreed otherwise.
2. MakeOn and/or Mission Control Lab is entitled to adjust all prices for its products or services, shown in its shop, on its website or otherwise, at any time.
3. Increases in the cost prices of products or parts thereof, which MakeOn and/or Mission Control Lab could not foresee at the time of making an offer or the conclusion of the agreement, may give rise to price increases.
4. The consumer has the right to terminate an agreement as a result of a price increase as referred to in paragraph 3, unless the increase is the result of statutory regulation.
5. The price with regard to services is determined by MakeOn and/or Mission Control Lab on the basis of the actual working hours.
6. The price is calculated according to the usual hourly rates of MakeOn and/or Mission Control Lab , valid for the period in which he carries out the work, unless a different hourly rate has been agreed.
7. If the parties have agreed on a total amount for a service provided by MakeOn and/or Mission Control Lab , this is always a target price, unless the parties have explicitly agreed upon in writing on a fixed price, which cannot be deviated from.
8. MakeOn and/or Mission Control Lab is entitled to deviate up to 10% of the target price.
9. If the target price exceeds 10%, MakeOn and/or Mission Control Lab must let the customer know in due time why a higher price is justified.
10. If the target price exceeds 10%, the customer has the right to cancel the part of the order that exceeds the target price by 10%.
11. MakeOn and/or Mission Control Lab has the right to adjust prices annually.
12. MakeOn and/or Mission Control Lab will communicate price adjustments to the customer prior to the moment the price increase becomes effective.
13. The consumer has the right to terminate the contract with MakeOn and/or Mission Control Lab if he does not agree with the price increase.
Payments and payment term
1. MakeOn and/or Mission Control Lab may, at the conclusion of the agreement, require a down payment of up to 50% of the agreed amount.
2. The customer must have paid the full amount within 7 days after delivery of the product.
3. Payment terms are considered as fatal payment terms. This means that if the customer has not paid the agreed amount at the latest on the last day of the payment term, he is legally in default, without MakeOn and/or Mission Control Lab having to send the customer a reminder or to put him in default.
4. MakeOn and/or Mission Control Lab reserves the right to make a delivery conditional upon immediate payment or to require adequate security for the total amount of the services or products.
Payments and payment term - Store
Products are immediately paid for in the store.
Consequences of late payment
1. If the customer does not pay within the agreed term, MakeOn and/or Mission Control Lab is entitled to charge an interest of 1% per month from the day the customer is in default, whereby a part of a month is counted for a whole month.
2. When the customer is in default, he is also due to extrajudicial collection costs and may be obliged to pay any compensation to MakeOn and/or Mission Control Lab .
3. The collection costs are calculated on the basis of the Reimbursement for extrajudicial collection costs.
4. If the customer does not pay on time, MakeOn and/or Mission Control Lab may suspend its obligations until the customer has met his payment obligation.
5. In the event of liquidation, bankruptcy, attachment or suspension of payment on behalf of the customer, the claims of MakeOn and/or Mission Control Lab on the customer are immediately due and payable.
6. If the customer refuses to cooperate with the performance of the agreement by MakeOn and/or Mission Control Lab , he is still obliged to pay the agreed price to MakeOn and/or Mission Control Lab .
Right of recovery of goods
1. As soon as the customer is in default, MakeOn and/or Mission Control Lab is entitled to invoke the right of recovery with regard to the unpaid products delivered to the customer.
2. MakeOn and/or Mission Control Lab invokes the right of recovery by means of a written or electronic announcement.
3. As soon as the customer has been informed of the claimed right of recovery, the customer must immediately return the products concerned to MakeOn and/or Mission Control Lab , unless the parties agree to make other arrangements about this.
4. The costs for the collection or return of the products are at the expense of the customer.
Right of cancellation
1. A consumer may cancel an online purchase during a cooling-off period of 14 days without giving any reason, provided that
· the product has not been used
· it is not a product that can spoil quickly, like food or flowers
· the product is not specially tailored for the consumer or adapted to its special needs
· it is not a product that may not be returned for hygienic reasons (underwear, swimwear, etc.)
· the seal is still intact, when the product is a data carrier with digital content (DVDs, CDs, etc.)
· the product is not a (holiday)trip, a transportation ticket, a catering order or a form of leisure activity,
· the product is not a separate magazine or a loose newspaper
· the purchase does not concern an (assignment to) urgent repair
· the consumer has not renounced his right of cancellation
2. The reflection period of 14 days as referred to in paragraph 1 commences:
o on the day after the consumer has received the last product or part of 1 order
o as soon as the consumer has received the first the product of a subscription
o as soon as the consumer has purchased a service for the first time
o as soon as the consumer has confirmed the purchase of digital content via the internet
3. The consumer can notify his right of cancellation via info@missioncontrollab.com, if desired by using the withdrawal form that can be downloaded via the website of MakeOn and/or Mission Control Lab , Missioncontrollab.com, Makeon.xzy, makeon.learnworlds.com.
4. The consumer is obliged to return the product to MakeOn and/or Mission Control Lab within 14 days after the notification of his right of cancellation, after which period his right of cancellation will lapse.
5. The costs for return are due MakeOn and/or Mission Control Lab if the complete order is returned.
6. If the purchase costs and any other costs (such as shipping and return costs) are eligible for reimbursement according to the law, MakeOn and/or Mission Control Lab will refund these costs to the consumer within 14 days of receipt of the timely appeal to the right of withdrawal, provided that the consumer has returned the product to MakeOn and/or Mission Control Lab in time.
Suspension of obligations by the customer
The customer waives the right to suspend the fulfillment of any obligation arising from this agreement.
Right of retention
1. MakeOn and/or Mission Control Lab can appeal to his right of retention of title and in that case retain the products sold by MakeOn and/or Mission Control Lab to the customer until the customer has paid all outstanding invoices with regard to MakeOn and/or Mission Control Lab , unless the customer has provided sufficient security for these payments.
2. The right of retention of title also applies on the basis of previous agreements from which the customer still owes payments to MakeOn and/or Mission Control Lab .
3. MakeOn and/or Mission Control Lab is never liable for any damage that the customer may suffer as a result of using his right of retention of title.
Settlement
The customer waives his right to settle any debt to MakeOn and/or Mission Control Lab with any claim on MakeOn and/or Mission Control Lab .
Retention of title
1. MakeOn and/or Mission Control Lab remains the owner of all delivered products until the customer has fully complied with all its payment obligations with regard to MakeOn and/or Mission Control Lab under whatever agreement with MakeOn and/or Mission Control Lab including of claims regarding the shortcomings in the performance.
2. Until then, MakeOn and/or Mission Control Lab can invoke its retention of title and take back the goods.
3. Before the property is transferred to the customer, the customer may not pledge, sell, dispose of or otherwise encumber the products.
4. If MakeOn and/or Mission Control Lab invokes its retention of title, the agreement will be dissolved and MakeOn and/or Mission Control Lab has the right to claim compensation, lost profits and interest.
Delivery
1. Delivery takes place while stocks last.
2. Delivery takes place at MakeOn and/or Mission Control Lab unless the parties have agreed upon otherwise.
3. Delivery of products ordered online takes place at the address indicated by the customer.
4. If the agreed price is not paid on time, MakeOn and/or Mission Control Lab has the right to suspend its obligations until the agreed price is fully paid.
5. In the event of late payment, the customer is automatically in default, and hereby he cannot object to late delivery by MakeOn and/or Mission Control Lab .
Delivery period
1. Any delivery period specified by MakeOn and/or Mission Control Lab is indicative and does not give the customer the right to dissolution or compensation if this period is not met with, unless the parties have expressly agreed otherwise in writing.
2. The delivery starts once the customer has fully completed the (electronic) ordering process and received an (electronic) confirmation of his order from MakeOn and/or Mission Control Lab .
3. Exceeding the specified delivery period does not entitle the customer to compensation or the right to terminate the contract, unless MakeOn and/or Mission Control Lab cannot deliver within [number of days late] or if the parties have agreed upon otherwise.
Actual delivery
The customer must ensure that the actual delivery of the products ordered by him can take place in time.
Transport costs
Transport costs are on behalf of the customer, unless the parties have agreed upon otherwise.
Packaging and shipping
1. If the package of a delivered product is opened or damaged, the customer must have a note drawn up by the forwarder or delivery person before receiving the product. In the absence of which MakeOn and/or Mission Control Lab may not be held liable for any damage.
2. If the customer himself takes care of the transport of a product, he must report any visible damage to products or the packaging prior to the transport to MakeOn and/or Mission Control Lab , failing which MakeOn and/or Mission Control Lab cannot be held liable for any damage.
Insurance
1. The customer undertakes to insure and keep insured the following items adequately against fire, explosion and water damage as well as theft:
o goods delivered that are necessary for the execution of the underlying agreement
o goods being property of MakeOn and/or Mission Control Lab that are present at the premises of the customer
o goods that have been delivered under retention of title
2. At the first request of MakeOn and/or Mission Control Lab , the customer provides the policy for these insurances for inspection.
Storage
1. If the customer orders products later than the agreed delivery date, the risk of any quality loss is entirely for the customer.
2. Any extra costs as a result of premature or late purchase of products are entirely at the customer's expense.
Guarantee
1. When parties have entered into an agreement with services included, these services only contain best-effort obligations for MakeOn and/or Mission Control Lab , not obligations of results.
2. The warranty relating to products only applies to defects caused by faulty manufacture, construction or material.
3. The warranty does not apply in the event of normal wear and tear and damage resulting from accidents, changes made to the product, negligence or improper use by the customer, or when the cause of the defect cannot clearly be established.
4. The risk of loss, damage or theft of the products that are the subject of an agreement between the parties, will pass on to the customer when these products are legally and/or factually delivered, at least are in the power of the customer or of a third party who receives the product for the benefit of the customer.
Performance of the agreement
1. MakeOn and/or Mission Control Lab executes the agreement to the best of its knowledge and ability and in accordance with the requirements of good workmanship.
2. MakeOn and/or Mission Control Lab has the right to have the agreed services (partially) performed by third parties.
3. The execution of the agreement takes place in mutual consultation and after written agreement and payment of the possibly agreed advance by the customer.
4. It is the responsibility of the customer that MakeOn and/or Mission Control Lab can start the implementation of the agreement on time.
5. If the customer has not ensured that MakeOn and/or Mission Control Lab can start the implementation of the agreement in time, the resulting additional costs and/or extra hours will be charged to the customer.
Duty to inform by the customer
1. The customer shall make available to MakeOn and/or Mission Control Lab all information, data and documents relevant to the correct execution of the agreement to in time and in the desired format and manner.
2. The customer guarantees the correctness, completeness and reliability of the information, data and documents made available, even if they originate from third parties, unless otherwise ensuing from the nature of the agreement.
3. If and insofar as the customer requests this, MakeOn and/or Mission Control Lab will return the relevant documents.
4. If the customer does not timely and properly provides the information, data or documents reasonably required by MakeOn and/or Mission Control Lab and the execution of the agreement is delayed because of this, the resulting additional costs and extra hours will be charged to the customer.
Duration of the agreement
1.
2. If a fixed-term contract has been entered into, it will be tacitly converted into an open-ended contract at the end of the term, unless 1 of the parties terminates the contract with due observance of a notice period of 2 month(s), or if a consumer terminates the agreement with due observance of a notice period of 1 month / the agreement ends at the end of the fixed term.
3. If the parties have agreed upon a term for the completion of certain activities, this is never a strict deadline, unless specified explicitly otherwise in writing. If this term is exceeded, the customer must give MakeOn and/or Mission Control Lab a written reasonable term to terminate the activities, before it may either terminate the contract or claim damages.
Intellectual property
1. MakeOn and/or Mission Control Lab retains all intellectual property rights (including copyright, patent rights, trademark rights, design and design rights, etc.) on all designs, drawings, writings, data carriers or other information, quotations, images, sketches, models, scale models, etc., unless parties have agreed otherwise in writing.
2. The customer may not copy or have copied the intellectual property rights without prior written permission from MakeOn and/or Mission Control Lab , nor show them to third parties and / or make them available or use them in any other way.
Penalties
1. If the customer violates the articles of these general terms and conditions about secrecy or intellectual property, then he forfeits on behalf of MakeOn and/or Mission Control Lab an immediately due and payable fine of € 1000 if the customer is a consumer and € 5000 if the customer is a company, for each violation and in addition an amount of 5% of the aforementioned amount for each day that this violation continues.
2. No actual damage, prior notice of default or legal proceedings are required in forfeiting the fine referred to in the first paragraph of this article.
3. The forfeiture of the fine referred to in the first paragraph of this article shall not affect the other rights of MakeOn and/or Mission Control Lab including its right to claim compensation in addition to the fine.
Indemnity
The customer indemnifies MakeOn and/or Mission Control Lab against all third-party claims that are related to the products and/or services supplied by MakeOn and/or Mission Control Lab .
Complaints
1. The customer must examine a product or service provided by MakeOn and/or Mission Control Lab as soon as possible for possible shortcomings.
2. If a delivered product or service does not comply with what the customer could reasonably expect from the agreement, the customer must inform MakeOn and/or Mission Control Lab of this as soon as possible, but in any case within 1 month after the discovery of the shortcomings.
3. Consumers must inform MakeOn and/or Mission Control Lab of this within two months after detection of the shortcomings.
4. The customer gives a detailed description as possible of the shortcomings, so that MakeOn and/or Mission Control Lab is able to respond adequately.
5. The customer must demonstrate that the complaint relates to an agreement between the parties.
6. If a complaint relates to ongoing work, this can in any case not lead to MakeOn and/or Mission Control Lab being forced to perform other work than has been agreed.
Giving notice
1. The customer must provide any notice of default to MakeOn and/or Mission Control Lab in writing.
2. It is the responsibility of the customer that a notice of default actually reaches MakeOn and/or Mission Control Lab (in time).
Joint and several Client liabilities
If MakeOn and/or Mission Control Lab enters into an agreement with several customers, each of them shall be jointly and severally liable for the full amounts due to MakeOn and/or Mission Control Lab under that agreement.
Liability of MakeOn and/or Mission Control Lab
1. MakeOn and/or Mission Control Lab is only liable for any damage the customer suffers if and insofar as this damage is caused by intent or gross negligence.
2. If MakeOn and/or Mission Control Lab is liable for any damage, it is only liable for direct damages that results from or is related to the execution of an agreement.
3. MakeOn and/or Mission Control Lab is never liable for indirect damages, such as consequential loss, lost profit, lost savings or damage to third parties.
4. If MakeOn and/or Mission Control Lab is liable, its liability is limited to the amount paid by a closed (professional) liability insurance and in the absence of (full) payment by an insurance company of the damages the amount of the liability is limited to the (part of the) invoice to which the liability relates.
5. All images, photos, colors, drawings, descriptions on the website or in a catalog are only indicative and are only approximate and cannot lead to any compensation and/or (partial) dissolution of the agreement and/or suspension of any obligation.
Expiry period
Every right of the customer to compensation from MakeOn and/or Mission Control Lab shall, in any case, expire within 12 months after the event from which the liability arises directly or indirectly. This does not exclude the provisions in article 6:89 of the Dutch Civil Code.
Dissolution
1. The customer has the right to dissolve the agreement if MakeOn and/or Mission Control Lab imputably fails in the fulfillment of his obligations, unless this shortcoming does not justify termination due to its special nature or because it is of minor significance.
2. If the fulfillment of the obligations by MakeOn and/or Mission Control Lab is not permanent or temporarily impossible, dissolution can only take place after MakeOn and/or Mission Control Lab is in default.
3. MakeOn and/or Mission Control Lab has the right to dissolve the agreement with the customer, if the customer does not fully or timely fulfill his obligations under the agreement, or if circumstances give MakeOn and/or Mission Control Lab good grounds to fear that the customer will not be able to fulfill his obligations properly.
Force majeure
1. In addition to the provisions of article 6:75 Dutch Civil Code, a shortcoming of MakeOn and/or Mission Control Lab in the fulfillment of any obligation to the customer cannot be attributed to MakeOn and/or Mission Control Lab in any situation independent of the will of MakeOn and/or Mission Control Lab , when the fulfillment of its obligations towards the customer is prevented in whole or in part or when the fulfillment of its obligations cannot reasonably be required from MakeOn and/or Mission Control Lab .
2. The force majeure situation referred to in paragraph 1 is also applicable - but not limited to: state of emergency (such as civil war, insurrection, riots, natural disasters, etc.); defaults and force majeure of suppliers, deliverymen or other third parties; unexpected disturbances of power, electricity, internet, computer or telecoms; computer viruses, strikes, government measures, unforeseen transport problems, bad weather conditions and work stoppages.
3. If a situation of force majeure arises as a result of which MakeOn and/or Mission Control Lab cannot fulfill one or more obligations towards the customer, these obligations will be suspended until MakeOn and/or Mission Control Lab can comply with it.
4. From the moment that a force majeure situation has lasted at least 30 calendar days, both parties may dissolve the agreement in writing in whole or in part.
5. MakeOn and/or Mission Control Lab does not owe any (damage) compensation in a situation of force majeure, even if it has obtained any advantages as a result of the force majeure situation.
Changes in the general terms and conditions
1. MakeOn and/or Mission Control Lab is entitled to amend or supplement these general terms and conditions.
2. Changes of minor importance can be made at any time.
3. Major changes in content will be discussed by MakeOn and/or Mission Control Lab with the customer in advance as much as possible.
4. Consumers are entitled to cancel the agreement in the event of a substantial change to the general terms and conditions.
Transfer of rights
1. The customer cannot transfer its rights deferring from an agreement with MakeOn and/or Mission Control Lab to third parties without the prior written consent of MakeOn and/or Mission Control Lab .
2. This provision applies as a clause with a property law effect as referred to in Section 3:83 (2) Dutch Civil Code.
Consequences of nullity or annullability
1. If one or more provisions of these general terms and conditions prove null or annullable, this will not affect the other provisions of these terms and conditions.
2. A provision that is null or annullable shall, in that case, be replaced by a provision that comes closest to what MakeOn and/or Mission Control Lab had in mind when drafting the conditions on that issue.
Applicable law and competent court
1. Dutch law is exclusively applicable to all agreements between the parties.
2. The Dutch court in the district where MakeOn and/or Mission Control Lab is established is exclusively competent in case of any disputes between parties, unless the law prescribes otherwise.
Drawn up on 25 november 2020.